Safety information

Operating environment

• The device is designed to be installed in clean, dust-free and insect-free places
• Operating temperature: -25 ~ 65°C (-13 ~ 149°F).
• Humidity range is 10% to 95% (non-condensing). Use the device in a dry environment.
• Away from heat sources and direct sunlight.
• It must not be exposed to acid fumes, salts and other chemicals.
• The device must not be used in places where there is a risk of gas explosion.
  

Use in inappropriate conditions may damage the device or shorten its life.

Electrical and power supply safety

• The device is powered with a voltage in the range of 8-36V. Voltage up to 24V is considered safe. Be especially careful when supplying them with higher voltages.
  
• Use only approved accessories
• Use the supplied power adapter or a good quality certified power adapter with the correct supply voltage range and sufficient power.
• Only use approved accessories like antenna etc.

Only a person with qualification and appropriate knowledge should install the device.

Malfunctioning and damaged device

• Do not disassemble the device.
• Only qualified personnel must service or repair the device or its accessories.
• If water or other liquid has got into the device, or if it looks mechanically damaged, do not connect the device, but take it to an authorized service center. 
  

What to do and what not to do

• You are solely responsible for the use of the device and any consequences of its use.
• Do not store or use the device in harsh environments such as dust, gases, oils, chemical vapors and damp places.
  
• Do not throw the device and its accessories. Handle with care.
  
• The device heats up during operation. Ensure proper ventilation.
  
• If you need to dispose of your device, check your local regulations for recycling and disposal of electronics.
  
• Route power, Ethernet, and antenna cables properly so that they cannot be accidentally pulled out.
  
• The device should be used and kept away from small children.