This is open type device intended for installation in a final casing/panel that offers mechanical protection and protection against the spread of fire.
Use in inappropriate conditions may damage the device or shorten its life.
--- ##### Electrical and power supply safety - The device is powered with a voltage in the range of 8-48V. Voltage up to 24V is considered safe. Be especially careful when supplying them with higher voltages. - Use only approved accessories - Use the supplied power adapter or a good quality certified power adapter with the correct supply voltage range and sufficient power. - Only use approved accessories like antenna etc.Only a person with qualification and appropriate knowledge should install the device.
--- ##### Malfunctioning and damaged device - Do not disassemble the device. - Only qualified personnel must service or repair the device or its accessories. - If water or other liquid has got into the device, or if it looks mechanically damaged, do not connect the device, but take it to an authorized service center. --- ##### What to do and what not to do - You are solely responsible for the use of the device and any consequences of its use. - Do not store or use the device in harsh environments such as dust, gases, oils, chemical vapors and damp places. - Do not throw the device and its accessories. Handle with care. - The device heats up during operation. Ensure proper ventilation. - If you need to dispose of your device, check your local regulations for recycling and disposal of electronics. - Route power, Ethernet, and antenna cables properly so that they cannot be accidentally pulled out. - The device should be used and kept away from small children.