The LAN interface use standard RJ45 8 pin connector with LED indicators. The connector support PoE class A, with power supply range 10-36V DC. If we use screw terminal power connector to power the device the LAN line is protected against back voltage from device. The device is protected from reverse power polarity. If unknowingly it is reverse connected, the Gateway will not work, but will not be damaged. Follow the diagram of connection.
Configuration of Ethernet
Ethernet configuration for LAN. Default value is:
IP = 192.168.10.50, Mask = 255.255.255.0, Gateway = 192.168.10.1, DNS1 = 8.8.8.8, DNS2 = 8.8.4.4